EMD GP60 | ||
|---|---|---|
![]() | ||
| Data Sheet Information Compiled by: JEAN-DENIS BACHAND | ||
| Revised: 19 Dec. 2016 | Artwork by: Jean-Denis Bachand | |
| - | ||
| Engine Builder: EMD | Engine: 710G cylinder | |
| Bore & Stroke | 9.08" X 10" | |
| RPM (Maximum / Minimum) | 800 / 275 | |
| Main Generator: GM - AR22 | Horsepower: 3800 | |
| Gear Ratio: 62:15 | Speed: 65 mph | |
| Trucks:HTB 4-Wheel | Configuration: B-B | |
| Traction Motor Blowers: Delco Electric Drive (4) | Model: GM | |
| Weight: 270,000 lbs | Traction Motors: GM - D87 (Four) | |
| Tractive Effort (starting) 65,000 lbs @20% | Tractive Effort (continuous): 62,400 lbs @ 11.1 mph | |
| Multiple Unit Capability: Yes | Dynamic Braking: Yes | |
| Auxilary Generator: Delco 64-72 | Alternator: GM D14 | |
| Air Brake: Westinghouse | Model: 24L | |
| Compressor: Gardner-Denver | Model: WBO | |
| Quantity Built: 357 | Dates: 10/1985 to 6/1992 | |
| - | ||
![]() | ||
| Artwork by: Jean-Denis Bachand | ||
| - | ||
| Exterior Dimensions | GP60 | |
| Total Length | 59'-02" | |
| Wheel Diameter | 40" | |
| Truck Wheel Base | 9'-00" | |
| Height to Top Engine Hood | 14'-07.5" | |
| Height to Top Cab | 15'-07.5" | |
| Cab Width | 10'-04.5" | |
| Engine Hood Width | 10'-03" | |
| Top of Walkway | 9'-04.5" | |
| Walkway Width | 3'-08.5" | |
| Center Bolster | 34'-00" | |
| Center Front Truck to Front Pilot | 3'-10" | |
| Center Rear Tucrk to Rear Pilot | 3'-10" | |
| Distance between Truck Centers | 43'-09" | |
| Minimum Turning Radious | 42 degrees | |
| - | - | |
| Fuel Oil (gallons): 3200 | Lubricating Oil (gallons): 304 | |
| Engine Cooling Water (gallons): 240 | Sand Capacity (gallons): 40 cu. ft. | |
| Options: Vapor Clarkson Boiler #4625 | ||
| - | ||
![]() | ||
| Artwork by: Jean-Denis Bachand | ||
| - | ||
|
We thank the following contributors for corrections and addtions: Timothy Bryan and Tom J. Starr.
Reference Sources:
| ||